ISZ425, ISZ13
Cummins
1-7 days
Genuine Original package or Ne
1 years
weigt: | |
---|---|
Number of cylinder: | |
Rated Power/Speed: | |
Emission Standard: | |
Availability: | |
Quantity: | |
PDF Export | |
DCEC ISZ425 automotive engine is a 6-cylinders in line, 13 liter four-strokes engine with 130mm bore and 163mm stroke, equipped with Electrically Control High-pressure Common Rail, DCEC ISZ425-40 automotive engine comes with turbocharger and Air- Air intercooler, with a EURO VI post-processor. The prime power at 2100RPM of DCEC ISZ425 automotive engine is 425 HP.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, Dongfeng-DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system. We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.
DCEC ISZ13 series electronic automotive engine can reach upto EU Stage VI emission standard, the number 30/40/50/60 are the emission standard mark of engine, which means engine emission standard are EU Stage III, IV, V, VI. For different emission standard DCEC ISZ13 electronic series automotive engine, the engine itself are the same, the major different are the after-treatment system and ECU program, EMAC will keep updating products introduction page of different emission standard version engines, welcome to subscribe our website to get latest update information.
1.Lower oil consumption,Extended stroke,the expansion of the combustion gas more fully, Increase effective efficiency output, the economy is better.
2.Strong power,advanced 4 air valves structure, greater horsepower, air burning more thoroughly, while making low speed torque increase, quicken response speedily, climb strongly.
3.Excellent reliability, with compulsive cold cut articulated pistons, Can bear extreme high mechanical load and heat load, Strength can be comparable with heavy engine.
4.Better emissions, Decorate injector and symmetrical combustion chamber in center, make the cylinder is more homogeneous mixture, burning more fully, lower emissions.
5.Super life, 30% engines 800,000 km without overhaul.
6.Excellence power, Clean burning, use the advanced lean-burn closed loop electronic control system.
7.Excellent cold start performance, equipped with air suction electric preheater and 7.8 kw power starter, completely improve the cold start performance of the engine.
Engine Model | Advertised Power | Peak Torque | Number Of Cylinders |
ISZ425-40A | 425 HP @ 2100 RPM | 1966 N.m @ 1600 RPM | 6 Cylinders |
ISZ425-40B | 425 HP @ 2100 RPM | 1966 N.m @ 1200 RPM | 6 Cylinders |
ISZ425-41 | 424 HP @ 2100 RPM | 2016 N.m @ 1000-1400 RPM | 6 Cylinders |
ISZ450-40A | 456 HP @ 2100 RPM | 2237 N.m @ 1600 RPM | 6 Cylinders |
ISZ450-40B | 450 HP @ 2100 RPM | 2237 N.m @ 1200 RPM | 6 Cylinders |
ISZ450-41 | 450 HP @ 2100 RPM | 2338 N.m @ 1000-1300 RPM | 6 Cylinders |
ISZ460-51 | 450 HP @ 2100 RPM | 2338 N.m @ 1000-1300 RPM | 6 Cylinders |
ISZ520-41 | 450 HP @ 2100 RPM | 2338 N.m @ 1000-1300 RPM | 6 Cylinders |
ISZ525-40A | 525 HP @ 2100 RPM | 2509 N.m @ 1600 RPM | 6 Cylinders |
ISZ525-40B | 525 HP @ 2100 RPM | 2508 N.m @ 1200 RPM | 6 Cylinders |
ISZ525-40C | 525 HP @ 2100 RPM | 2508 N.m @ 1200 RPM | 6 Cylinders |
DCEC ISZ425 automotive engine is a 6-cylinders in line, 13 liter four-strokes engine with 130mm bore and 163mm stroke, equipped with Electrically Control High-pressure Common Rail, DCEC ISZ425-40 automotive engine comes with turbocharger and Air- Air intercooler, with a EURO VI post-processor. The prime power at 2100RPM of DCEC ISZ425 automotive engine is 425 HP.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, Dongfeng-DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system. We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.
DCEC ISZ13 series electronic automotive engine can reach upto EU Stage VI emission standard, the number 30/40/50/60 are the emission standard mark of engine, which means engine emission standard are EU Stage III, IV, V, VI. For different emission standard DCEC ISZ13 electronic series automotive engine, the engine itself are the same, the major different are the after-treatment system and ECU program, EMAC will keep updating products introduction page of different emission standard version engines, welcome to subscribe our website to get latest update information.
1.Lower oil consumption,Extended stroke,the expansion of the combustion gas more fully, Increase effective efficiency output, the economy is better.
2.Strong power,advanced 4 air valves structure, greater horsepower, air burning more thoroughly, while making low speed torque increase, quicken response speedily, climb strongly.
3.Excellent reliability, with compulsive cold cut articulated pistons, Can bear extreme high mechanical load and heat load, Strength can be comparable with heavy engine.
4.Better emissions, Decorate injector and symmetrical combustion chamber in center, make the cylinder is more homogeneous mixture, burning more fully, lower emissions.
5.Super life, 30% engines 800,000 km without overhaul.
6.Excellence power, Clean burning, use the advanced lean-burn closed loop electronic control system.
7.Excellent cold start performance, equipped with air suction electric preheater and 7.8 kw power starter, completely improve the cold start performance of the engine.
Engine Model | Advertised Power | Peak Torque | Number Of Cylinders |
ISZ425-40A | 425 HP @ 2100 RPM | 1966 N.m @ 1600 RPM | 6 Cylinders |
ISZ425-40B | 425 HP @ 2100 RPM | 1966 N.m @ 1200 RPM | 6 Cylinders |
ISZ425-41 | 424 HP @ 2100 RPM | 2016 N.m @ 1000-1400 RPM | 6 Cylinders |
ISZ450-40A | 456 HP @ 2100 RPM | 2237 N.m @ 1600 RPM | 6 Cylinders |
ISZ450-40B | 450 HP @ 2100 RPM | 2237 N.m @ 1200 RPM | 6 Cylinders |
ISZ450-41 | 450 HP @ 2100 RPM | 2338 N.m @ 1000-1300 RPM | 6 Cylinders |
ISZ460-51 | 450 HP @ 2100 RPM | 2338 N.m @ 1000-1300 RPM | 6 Cylinders |
ISZ520-41 | 450 HP @ 2100 RPM | 2338 N.m @ 1000-1300 RPM | 6 Cylinders |
ISZ525-40A | 525 HP @ 2100 RPM | 2509 N.m @ 1600 RPM | 6 Cylinders |
ISZ525-40B | 525 HP @ 2100 RPM | 2508 N.m @ 1200 RPM | 6 Cylinders |
ISZ525-40C | 525 HP @ 2100 RPM | 2508 N.m @ 1200 RPM | 6 Cylinders |